Self-compacting concrete has soon been around for a decade. Recently the prefabrication industry has started to use this fairly new concrete type in larger scales, mainly because of its distinctive properties.  There are still certain areas that need to be thoroughly examined, such as bond capacity. There have been very few studies regarding shear capacity due to the fact that the procedure is complicated.This report will highlight a method to examine the shear capacity of different surfaces that have been prewetted as well as non-prewetted surfaces. The surface areas follow BBK 04?s and Eurocode 2?s demand for surface roughness.  A smooth surface will be completed in order to confirm if the different shapes influence the bond strength by shear stress or not.                       The purpose of this essay is to measure the bond strength within the shear capacity as well as examine the impact it has on surface roughness and treatment for shear bond.The method used to identify the shear capacity is called L-shaped Push-Off Test.

A today common soil reinforcement method is the installation of lime-cement columns. Lime-cement columns have been used since the 1970?s and have been a useful method for stabilizing soil at great depths. It is mostly used for stabilizing road and railway embankments because the method is economically viable and the columns are easy to install. The total costs for the installation of the lime-cement columns is dependent on the numbers of installed columns, what percentage of lime and cement that has been used and the pattern in which the columns has been installed.

Syfte: Syftet är att undersöka sambandet mellan CDS spreaden och bond spreaden, samt att jämföra dessa över tid. Detta genomförs genom att testa för ett kointegrationssamband samt Granger-kausalitet mellan CDS spreaden och bond spreaden för varje enhet som ingår i urvalet, och för olika perioder. Också deskriptiv statistik används. Metod: Kvantitativ metod: Augmented Dickey-Fuller test, KPSS, Engle-Granger test, Johansen-test, Granger kausalitet Teoretiska perspektiv: Prissättningsmodeller för kreditrisk. Arbitragesamband.

Introduktion/Syfte. Intresset för och användandet av adhesiv cementering av keramiska material har ökat under de senaste åren. Detta har lett till ett ökat intresse att kunna jämföra olika studiers resultat med varandra och därmed har även intresset för att utveckla internationella standarder inom forskning ökat. Syftet med denna studie var att jämföra den adhesiva bindningsstyrkan mellan ett laboratorieframställt material innehållande kvartsmjölsförstärkt epoxyresin (Sipoxy), med emalj och dentin. Detta för att avgöra om Sipoxy kan användas som en standardiserad ersättning istället för tänder i in vitro studier som utvärderar bondade keramiska rekonstruktioner. Material & metod.

This thesis engages the topic of test methods for wood adhesives. Two test methods were evaluated, EN 302-1, a European standard, and ASTM D905, an American standard. The total amount of specimens manufactured and tested was more than 500. The adhesive bonds were tested in shear with an increasing load on the specimen until failure.The adhesives used were epoxy-resin, phenol-resorcinol-formaldehyde and a 2-K polyurethane. The test programme included five different types of intentional errors per method, in order to investigate the sensitivity of the test methods.

I denna uppsats har den musikaliska förändringen i James Bond-temat, sett över de 21 filmer som gjorts fram till denna uppsats genomförande, analyserats och tolkats. Syftet är att dela med mig av mina tankar och analyser om hur temat framförts och utvecklats, samt därmed också bidra till att utveckla kunskapen om James Bond-världen.Efter en litteraturbaserad del, där bakgrunden till James Bond-temats uppkomst behandlas, så analyseras sedan film för film i Bond-serien från Dr. No till Casino Royale. Analysen tar främst upp delarna synkronisering, instrumentering och influenser.Analyserna visar på att James Bond-temat i grund och botten bygger på samma melodi genom alla filmer, men också har förändrats i stor utsträckning i utförandet..

Introduction: A complex interaction between muscles, tendons, bones, joints and nerves are required for optimal function of the human hand. It is known that an individual?s grip strength is vital for performance of physical demanding tasks such as strength training with free weights. Strength training including a thicker grip around the bar may enhance the strength of the grip in the athlete without other special routines for grip strength development. The purpose of this investigation was to examine the difference in performance in multiple repetitions in two strength training exercises using two different sizes on the bar, to look for correlations between grip strength of the subjects hand and the amount of repetitions executed with two different size of the bar and finally the correlation of hand size and the amount of repetitions executed with two different size of the bar.Method: 15 strength training men (23,9 ± 4,1 years), underwent measurements of hand size, maximum grip strength, 1 repetition maximum (1RM), a 80 % of 1RM weight strength test with two different  bar sizes.Results: The results from the present investigation indicates a 21,1 % reduction of 80 % of 1 RM weight performance in repetitions executed in the bench press with the thicker diameter of the bar and a 66,2 % reduction in repetitions executed with a 80 % of 1 RM weight in the lying bench row with the thicker diameter of the bar.

In this report, the risk of cracking in joints and/in adjacent concrete is estimated by checking shear forces in joints and the ratio between the actual maximum principal stress ant the actual strength of the concrete. The shear force has been estimated both by simple methods as well as by two-dimensional calculations. The risk of cracking in the concrete and/or in the joints is estimated with the computer program ConStre. The restraint from a resilient foundation or rock on a young concrete construction is estimated by a simple method that is exemplified. It is shown that the restraint can be neglected in some cases.

Crossfit is a recently developed form of training which is based on a number of functional resistance exercises performed at high intensity, often to the point of muscular failure. Crossfit has since its introduction 30 years ago, reached vast popularity all around the world, including Sweden. Its practitioners considers Crossfit to be an effective training method for achieving a functional and total trained physique thru improvements in VO2max, muscle strength, endurance, balance and speed. Few scientific studies has been published in the subject which is why this study sets out to examine the effect of Crossfit on VO2max (measured with Åstrands submaximal cyclingtest), maximal strength capacity in lower- and upper body muscles (measured with 1 RM tests in bench press and leg press), rapid strength capacity and strength endurance capacity in upper body muscles (measured with push-up test in 30 seconds) and explosive strength capacity in lower body muscles (measured with sergeant jump test). Five women with an average of 33(±5) years of age all new to Crossfit, performed these tests at two separate occasions with a training period of four weeks consisting of 12(±3,67) Crossfit sessions in between.The result showed a significant improvement in the maximal strength capacity of the leg extension muscles (p=0,025).

The aim of this study was to examine if it was possible to improve fitness and strength in young ice hockey players with help of a training programme based on functional training and aerobic training. The training programme was performed on Halmstad Hockey U-16 team where 17 boys participated in the study. We performed the training in a period of sex weeks with three training occasions each week. These consisted of two functional training sessions and one fitness session. In the beginning we emphasized the importance of a correct performance and technique.

ÅF Test Center in Borlänge had a need to expand their capacity for compressive and tensile strength tests. They wanted to do this by using a hydraulic cylinder, which they already possessed, to apply the force with. This required a load receiving structure. The aim of this work was to design and dimensioning a test bench for a cylinder marked NIKE 300 tons. The work would result in a completed design proposal on a test bench which could manage to run the compressive and tensile strength tests of up to 3000 kN.

Skador och slitage på brokonstruktioner av betong beror på tösalter, armeringskorrosion och frostcykler i kombination med ökande trafiklaster. Den i särklass vanligaste reparationsåtgärden för dessa typer av skador är att göra en pågjutning. Metoden går ut på att först avlägsna det skadade eller dåliga betongskiktet innan en ny betong pågjuts. För att bedöma hur bra ett pågjutningsarbete är behöver vidhäftningen mellan den nya pågjutningen och gamla betongen fastställas. Den mest använda metoden för detta syfte är s.k.

This report presents the results of the tests of data rate and signal strength that I have conducted. The tests have been performed in the municipality of Arvidsjaur, Sweden. The report also contains the conclusions I have drawn from the results as well as an introduction to radio and the technology used in the nets that have been testedThe equipment used is:LG G2 cellphone used to test Telias 3GHuawei b593s-22 3G/4G router used to test Tele2s 3G/4GMobile Broadband Gateway R-90 used to test Net1s CDMAThe data rate has been tested with bredbandskollen (www.bredbandskollen.se). The signal strength(RSSI) has been read in the configuration menu of the broadband routers as well as in the cellphone.The conclussions drawn:Net1s net appears to be more used compared to its capacity than the other netsTele2s net has a high and even data rate where it?s signal strength is sufficient.

This report presents the results of the tests of data rate and signal strength that I have conducted. The tests have been performed in the municipality of Arvidsjaur, Sweden. The report also contains the conclusions I have drawn from the results as well as an introduction to radio and the technology used in the nets that have been testedThe equipment used is:LG G2 cellphone used to test Telias 3GHuawei b593s-22 3G/4G router used to test Tele2s 3G/4GMobile Broadband Gateway R-90 used to test Net1s CDMAThe data rate has been tested with bredbandskollen (www.bredbandskollen.se). The signal strength(RSSI) has been read in the configuration menu of the broadband routers as well as in the cellphone.The conclussions drawn:Net1s net appears to be more used compared to its capacity than the other netsTele2s net has a high and even data rate where it?s signal strength is sufficient.

IntroductionSuccessful training is a key for athletes to make progress in their development. Training must not just involve overload, but also must prevent the combination of excessive overload plus inadequate recovery. Athletes can experience short-term performance decrement without severe psychological or lasting other negative symptoms. Too much hard exercise or too little sleep can cause overtraining, a condition in which the subject can prevent to be away from the sport for several weeks or months. Previous studies have detected that it is important to avoid overtraining.